Comp Cams Camshaft, Mechanical Roller, Lift 0.722" / 0.701", Duration 297 / 306, Small Block Chevy (Open Wheel Modified Traction Control)
SKU: CMP-12-843-14
$546.95
Details
Details
3/8-5/8 tracks w/ wide corners or slick surface. 383+ ci., 12:1+, 4 BBL gas or alcohol.
Requires good intake & heads. 4/7 firing order swap. The OWM T/C series offers a cam for just about every open wheel modified racer. With the newest lobe designs, a nice broad torque curve with great power and reduced tire spin, what open wheel modified racer wouldn’t want to try out this legal traction control? COMP Cams® has taken camshaft technology for open wheel modified racers into the next century with the introduction of the OWM T/C line. But don’t take our word for it – pick one up and see for yourself.
If rules allow a solid roller valve train set-up, these 4/7 firing order swap cams are the best choice for power and durability. With four specially designed camshafts to fit most popular engine combinations and track conditions, every open wheel modified racer can benefit from this breakthrough cam technology. These cams deliver a gentle torque curve for ease in hooking the chassis up, yet will not run out of horsepower on the top end. Designed for Race Series Valve Springs, Endure-X? Solid Roller Lifters and the latest valve train component technology, the COMP Cams? engineers have designed the ultimate camshafts for local and big money open wheel modified competition.
This cam is absolutely not IMCA legal!
Requires good intake & heads. 4/7 firing order swap. The OWM T/C series offers a cam for just about every open wheel modified racer. With the newest lobe designs, a nice broad torque curve with great power and reduced tire spin, what open wheel modified racer wouldn’t want to try out this legal traction control? COMP Cams® has taken camshaft technology for open wheel modified racers into the next century with the introduction of the OWM T/C line. But don’t take our word for it – pick one up and see for yourself.
If rules allow a solid roller valve train set-up, these 4/7 firing order swap cams are the best choice for power and durability. With four specially designed camshafts to fit most popular engine combinations and track conditions, every open wheel modified racer can benefit from this breakthrough cam technology. These cams deliver a gentle torque curve for ease in hooking the chassis up, yet will not run out of horsepower on the top end. Designed for Race Series Valve Springs, Endure-X? Solid Roller Lifters and the latest valve train component technology, the COMP Cams? engineers have designed the ultimate camshafts for local and big money open wheel modified competition.
This cam is absolutely not IMCA legal!
- Engine Family : Chevrolet 262-400 c.i. 8 Cylinder (1958-1998)
- RPM Operating Range : 4,200-8000
- Grind Number : 297HXL
- Cam Type : Solid Roller
- Lifter Style : Solid Roller
- Camshaft Series : Open Wheel Modified Traction Control 4 and 7 Swap Firing Order
- Usage : Strip
- Advertised Intake Duration : 297
- Advertised Exhaust Duration : 306
- Intake Duration at .050 Inch Lift : 268
- Exhaust Duration at .050 Inch Lift : 273
- Intake Valve Lift : 0.722
- Exhaust Valve Lift : 0.701
- Lobe Separation : 107
- Exhaust Close ATDC : 47
- Intake Open BTDC : 41
- Exhaust Open BBDC : 78
- Intake Close ABDC : 76
- Camshaft Gear Attachment : 3-Bolt